Thank you for subscribing to your personalised job alerts.

7 jobs found for Design Engineer

filter3
clear all
    • permanent
    • S$5,000 - S$6,500, per month, with AWS + VB
    • full-time
    About the CompanyMy client is a successful and growing integrator company that has great opportunities for an aerostructure design engineer in Singapore. About the JobWork together with the engineering and design team to generate practical and cost-effective manufacturing methodology and process for the aerostructure system.Perform detailed structural design and analysis (e.g. engine aerostructure components).Develop processes, define material and identify equipment necessary to manufacture the components.Prepare, review and release manufacturing drawings.Develop creative and innovative material and structural methods and improvements to existing processes.. Skills & Experience requiredMaster / Degree in Mechanical engineering or equivalent.Minimum 3 years in years of experience in aircraft structural design and analysis.Knowledge of detailed structural design and manufacturing methods and approach and experience with composite and metal structures materials will be a plus.Familiar with national aviation authority (NAA) certification requirements and activities such as EASA or FAA part 25 will be a plus. If you are interested in the position, kindly send your CVs to alexie.tan(@)randstad.com.sgPlease include your availability, expected salary, and reason for leaving your current job.We regret that only shortlisted candidates will be contacted.EA: R2196935 / Reg: R1325913
    About the CompanyMy client is a successful and growing integrator company that has great opportunities for an aerostructure design engineer in Singapore. About the JobWork together with the engineering and design team to generate practical and cost-effective manufacturing methodology and process for the aerostructure system.Perform detailed structural design and analysis (e.g. engine aerostructure components).Develop processes, define material and identify equipment necessary to manufacture the components.Prepare, review and release manufacturing drawings.Develop creative and innovative material and structural methods and improvements to existing processes.. Skills & Experience requiredMaster / Degree in Mechanical engineering or equivalent.Minimum 3 years in years of experience in aircraft structural design and analysis.Knowledge of detailed structural design and manufacturing methods and approach and experience with composite and metal structures materials will be a plus.Familiar with national aviation authority (NAA) certification requirements and activities such as EASA or FAA part 25 will be a plus. If you are interested in the position, kindly send your CVs to alexie.tan(@)randstad.com.sgPlease include your availability, expected salary, and reason for leaving your current job.We regret that only shortlisted candidates will be contacted.EA: R2196935 / Reg: R1325913
    • permanent
    • full-time
    about the companyOur client is a global manufacturer of precision instruments. This rapidly expanding optical & product design company is looking for a talented Senior / Mechanical design Engineer to take on a newly created role.about the jobDesign of mechanical components and subsystems for precision instrumentsCreate and maintain procedures for Document ControlSpecifying and evaluating mechanical componentsPlans and coordinates all aspects of Sustaining projects from initiation to implementation of changesContinuous improvement and sustaining projectsConduct DFM / DFA for the designModify and improve existing designs and productsManage Engineering Change Requests and NoticesComplete the full product lifecycle ( from specification to design , prototype & manufacturing)skills & experience requiredMaster / Degree in Mechanical / Electromechanical EngineeringMin 5 years of experience in R&D product design (consumer electronics / medical instrument / industrial products or machining) Proficient in using matlab and done testing after mechanical product designDesign Knowledge & experience in metal parts, related assemblies, metal die-casting Complete full new product development from concept stage to prototype to transfer & product launching Six-Sigma Green / Black Belt Certification will be plusWell versed with GD&T & tolerance stack analysisAble to read and interpret engineering drawingsWilling to work in west area of Singapore (Sembawang / Marsiling / Woodlands)If you are interested in the position , kindly send your CVs to yitwei.kwan(@)randstad.com.sgPlease include your availability, expected salary and reason for leaving current jobWe regret that only shortlisted candidates will be contactedEA: 94C3609 / Reg: R1325913
    about the companyOur client is a global manufacturer of precision instruments. This rapidly expanding optical & product design company is looking for a talented Senior / Mechanical design Engineer to take on a newly created role.about the jobDesign of mechanical components and subsystems for precision instrumentsCreate and maintain procedures for Document ControlSpecifying and evaluating mechanical componentsPlans and coordinates all aspects of Sustaining projects from initiation to implementation of changesContinuous improvement and sustaining projectsConduct DFM / DFA for the designModify and improve existing designs and productsManage Engineering Change Requests and NoticesComplete the full product lifecycle ( from specification to design , prototype & manufacturing)skills & experience requiredMaster / Degree in Mechanical / Electromechanical EngineeringMin 5 years of experience in R&D product design (consumer electronics / medical instrument / industrial products or machining) Proficient in using matlab and done testing after mechanical product designDesign Knowledge & experience in metal parts, related assemblies, metal die-casting Complete full new product development from concept stage to prototype to transfer & product launching Six-Sigma Green / Black Belt Certification will be plusWell versed with GD&T & tolerance stack analysisAble to read and interpret engineering drawingsWilling to work in west area of Singapore (Sembawang / Marsiling / Woodlands)If you are interested in the position , kindly send your CVs to yitwei.kwan(@)randstad.com.sgPlease include your availability, expected salary and reason for leaving current jobWe regret that only shortlisted candidates will be contactedEA: 94C3609 / Reg: R1325913
    • permanent
    • S$6,500 - S$12,000, per month, +AWS+VB
    • full-time
    about the company. My client is a leading manufacturer of analog electronic products. With an outstanding international reputation in its field and a great emphasis on training & development, it is certainly a great brand to explore if you are seeking for greater achievement in your career.about the jobDesign & development of analog circuirts product from specification to prototypeAnalog IC design , simulation verficiation, layout , silicon correlation & characterization , failure analysisClose loop, noise and distortion analysisTest & debug of Analog IC prototypeCharacterizing and validate analog circuit performanceDesign high performance power management circuit such as DC-DC converters, LDO, capacitive or inductive switching regulatorsPerform silicon debugskills & experience requiredPhD / Master / Degree in Electrical & Electronics / Integrated Circuit / Microelectronics EngineeringMin 4 years of hands on experience with analog / mix circuit designWilling to work in a new start up entity in Singapore Strong Experience with various switching regulator power conversion will be a plusGood knowledge in power electronics & switched capacitor circuits will be a plusAC/DC or DC/DC converter design experience will be a plusExperience in using IC design tools : Spectre & ultrasimWell versed with LDOs (low dropout regulators) will be a plusIf you are interested in the position , kindly send your CVs in to yitwei.kwan(@)randstad.com.sgPlease include your availability, expected salary and reason for leaving current job.We regret that only shortlisted candidates will be contactedEA: 94C3609 / Reg: R1325913
    about the company. My client is a leading manufacturer of analog electronic products. With an outstanding international reputation in its field and a great emphasis on training & development, it is certainly a great brand to explore if you are seeking for greater achievement in your career.about the jobDesign & development of analog circuirts product from specification to prototypeAnalog IC design , simulation verficiation, layout , silicon correlation & characterization , failure analysisClose loop, noise and distortion analysisTest & debug of Analog IC prototypeCharacterizing and validate analog circuit performanceDesign high performance power management circuit such as DC-DC converters, LDO, capacitive or inductive switching regulatorsPerform silicon debugskills & experience requiredPhD / Master / Degree in Electrical & Electronics / Integrated Circuit / Microelectronics EngineeringMin 4 years of hands on experience with analog / mix circuit designWilling to work in a new start up entity in Singapore Strong Experience with various switching regulator power conversion will be a plusGood knowledge in power electronics & switched capacitor circuits will be a plusAC/DC or DC/DC converter design experience will be a plusExperience in using IC design tools : Spectre & ultrasimWell versed with LDOs (low dropout regulators) will be a plusIf you are interested in the position , kindly send your CVs in to yitwei.kwan(@)randstad.com.sgPlease include your availability, expected salary and reason for leaving current job.We regret that only shortlisted candidates will be contactedEA: 94C3609 / Reg: R1325913
    • permanent
    • S$7,500 - S$13,000, per month, +AWS+VB
    • full-time
    about the company. My client is a leading manufacturer of analog electronic products. With an outstanding international reputation in its field and a great emphasis on training & development, it is certainly a great brand to explore if you are seeking for greater achievement in your career.about the jobDesign & development of Analog/Mixed-Signal circuirts product from specification to prototypeAnalog IC design , simulation verficiation, layout , silicon correlation & characterization , failure analysisClose loop, noise and distortion analysisTest & debug of Analog IC prototypeCharacterizing and validate analog circuit performanceDesign high performance power management circuit such as DC-DC converters, LDO, capacitive or inductive switching regulatorsPerform silicon debugSystem-Level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integrationskills & experience requiredPhD / Master / Degree in Electrical & Electronics / Integrated Circuit / Microelectronics EngineeringMin 4 years of hands on experience with analog / mix circuit designWilling to work in a new start up entity in Singapore Strong Experience with various switching regulator power conversion will be a plusGood knowledge in power electronics & switched capacitor circuits will be a plusAC/DC or DC/DC converter design experience will be a plusThorough understanding of Low noise pre-amplifier, CMOS Oscillator, LDO, Differential Amplifier, comparator, BandgapWell versed with LDOs (low dropout regulators) will be a plusExperience in design of ultra low power ADCIf you are interested in the position , kindly send your CVs in to yitwei.kwan(@)randstad.com.sgPlease include your availability, expected salary and reason for leaving current job.We regret that only shortlisted candidates will be contactedEA: 94C3609 / Reg: R1325913
    about the company. My client is a leading manufacturer of analog electronic products. With an outstanding international reputation in its field and a great emphasis on training & development, it is certainly a great brand to explore if you are seeking for greater achievement in your career.about the jobDesign & development of Analog/Mixed-Signal circuirts product from specification to prototypeAnalog IC design , simulation verficiation, layout , silicon correlation & characterization , failure analysisClose loop, noise and distortion analysisTest & debug of Analog IC prototypeCharacterizing and validate analog circuit performanceDesign high performance power management circuit such as DC-DC converters, LDO, capacitive or inductive switching regulatorsPerform silicon debugSystem-Level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integrationskills & experience requiredPhD / Master / Degree in Electrical & Electronics / Integrated Circuit / Microelectronics EngineeringMin 4 years of hands on experience with analog / mix circuit designWilling to work in a new start up entity in Singapore Strong Experience with various switching regulator power conversion will be a plusGood knowledge in power electronics & switched capacitor circuits will be a plusAC/DC or DC/DC converter design experience will be a plusThorough understanding of Low noise pre-amplifier, CMOS Oscillator, LDO, Differential Amplifier, comparator, BandgapWell versed with LDOs (low dropout regulators) will be a plusExperience in design of ultra low power ADCIf you are interested in the position , kindly send your CVs in to yitwei.kwan(@)randstad.com.sgPlease include your availability, expected salary and reason for leaving current job.We regret that only shortlisted candidates will be contactedEA: 94C3609 / Reg: R1325913
    • permanent
    • S$4,500 - S$7,800, per month, +AWS+VB
    • full-time
    about the company. Our client provides analytical solutions, scientific equipment, testing machines, balances and medical equipment to a wide range of laboratories. This is a company whose expertise has made them the leader in the field.This well recognised brand offers a great workng envirnment in brand new office.about the jobDefine design structure to provide desired functionality per product and user requirementsDelivering and maintaining the System SpecificationsDeliver and maintain Functional / System SpecificationsDefine and ensure the system components will integrate successfully to appropriate quality levels, ensuring full traceability of requirementsExcels in design for reliability and robustness in the development of products Ensure the system components will integrate successfullyCompleting and maintaining the system Risk AnalysisEnsure rigorous documentation for all phases of development, including design specifications,verification test plans, and project schedulesSupport Manufacturing for initial and ongoing production needsskills & experience requiredMaster / Degree in Systems / Electrical / Electronics / Mechanical EngineeringMin 5 years of experience in R&D manufacturing environmentExperience in new product development & system engineering designExperience in six sigma / DFSS methodology / FDA / CFR / ISO 13485 will be a plusUnderstand about usability Engineering Process If you are interested in the position , kindly send your CVs in to yitwei.kwan(@)randstad.com.sgPlease include your availability, expected salary and reason for leaving current job.We regret that only shortlisted candidates will be contactedEA: 94C3609 / Reg: R1325913
    about the company. Our client provides analytical solutions, scientific equipment, testing machines, balances and medical equipment to a wide range of laboratories. This is a company whose expertise has made them the leader in the field.This well recognised brand offers a great workng envirnment in brand new office.about the jobDefine design structure to provide desired functionality per product and user requirementsDelivering and maintaining the System SpecificationsDeliver and maintain Functional / System SpecificationsDefine and ensure the system components will integrate successfully to appropriate quality levels, ensuring full traceability of requirementsExcels in design for reliability and robustness in the development of products Ensure the system components will integrate successfullyCompleting and maintaining the system Risk AnalysisEnsure rigorous documentation for all phases of development, including design specifications,verification test plans, and project schedulesSupport Manufacturing for initial and ongoing production needsskills & experience requiredMaster / Degree in Systems / Electrical / Electronics / Mechanical EngineeringMin 5 years of experience in R&D manufacturing environmentExperience in new product development & system engineering designExperience in six sigma / DFSS methodology / FDA / CFR / ISO 13485 will be a plusUnderstand about usability Engineering Process If you are interested in the position , kindly send your CVs in to yitwei.kwan(@)randstad.com.sgPlease include your availability, expected salary and reason for leaving current job.We regret that only shortlisted candidates will be contactedEA: 94C3609 / Reg: R1325913
    • permanent
    • S$3,800 - S$4,700, per month, with AWS + VB
    • full-time
    About the CompanyMy client is a solutions provider for the back-end testing of the semiconductor manufacturing process. It works closely with its key customer, Intel, to design, engineer, and manufacture the test handlers. About the JobProvide technical expertise to the manufacturing team and field support.Act as a lead on support, escalations, training, and documentation.Hands-on involvement and process feedback on engineering NPD, NPI, DOE, FMEA and prototype builds.Setup/service equipment/tool integration at the customer site.Develop new manuals and ways to improve current documentation. Skills & Experience requiredDiploma in engineering or equivalent.Minimum 2 years in years of experience in automated equipment in the semiconductor industry.Knowledge in troubleshooting and repair of electronics, electromechanical, mechanical and fluid handling systems would be a plus. Experience in software installation and configuration would be a plus.. If you are interested in the position, kindly send your CVs to alexie.tan(@)randstad.com.sgPlease include your availability, expected salary, and reason for leaving your current job.We regret that only shortlisted candidates will be contacted.EA: R2196935 / Reg: R1325913
    About the CompanyMy client is a solutions provider for the back-end testing of the semiconductor manufacturing process. It works closely with its key customer, Intel, to design, engineer, and manufacture the test handlers. About the JobProvide technical expertise to the manufacturing team and field support.Act as a lead on support, escalations, training, and documentation.Hands-on involvement and process feedback on engineering NPD, NPI, DOE, FMEA and prototype builds.Setup/service equipment/tool integration at the customer site.Develop new manuals and ways to improve current documentation. Skills & Experience requiredDiploma in engineering or equivalent.Minimum 2 years in years of experience in automated equipment in the semiconductor industry.Knowledge in troubleshooting and repair of electronics, electromechanical, mechanical and fluid handling systems would be a plus. Experience in software installation and configuration would be a plus.. If you are interested in the position, kindly send your CVs to alexie.tan(@)randstad.com.sgPlease include your availability, expected salary, and reason for leaving your current job.We regret that only shortlisted candidates will be contacted.EA: R2196935 / Reg: R1325913
    • permanent
    • S$4,300 - S$8,000, per month, +AWS+VB
    • full-time
    about the companyOur client is a global manufacturer of precision instruments. This rapidly expanding optical & product design company is looking for a talented Senior / Mechanical design Engineer to take on a newly created role.about the jobDesign of mechanical components and subsystems for precision instrumentsCreate and maintain procedures for Document ControlSpecifying and evaluating mechanical componentsPlans and coordinates all aspects of Sustaining projects from initiation to implementation of changesContinuous improvement and sustaining projectsConduct DFM / DFA for the designModify and improve existing designs and productsManage Engineering Change Requests and NoticesComplete the full product lifecycle ( from specification to design , prototype & manufacturing)skills & experience requiredMaster / Degree in Mechanical / Electromechanical EngineeringMin 7 years of experience in R&D product design (consumer electronics / medical instrument / industrial products or machining) Design Knowledge & experience in metal parts, related assemblies, metal die-casting ,high precision machiningComplete full new product development from concept stage to prototype to transfer & product launching Six-Sigma Green / Black Belt Certification will be plusWell versed with GD&T & tolerance stack analysisAble to read and interpret engineering drawingsCompetent in 3D/2D modelling software, particularly with NX (Unigraphics)Willing to work in west area of Singapore (Sembawang / Marsiling / Woodlands)If you are interested in the position , kindly send your CVs to yitwei.kwan(@)randstad.com.sgPlease include your availability, expected salary and reason for leaving current jobWe regret that only shortlisted candidates will be contactedEA: 94C3609 / Reg: R1325913
    about the companyOur client is a global manufacturer of precision instruments. This rapidly expanding optical & product design company is looking for a talented Senior / Mechanical design Engineer to take on a newly created role.about the jobDesign of mechanical components and subsystems for precision instrumentsCreate and maintain procedures for Document ControlSpecifying and evaluating mechanical componentsPlans and coordinates all aspects of Sustaining projects from initiation to implementation of changesContinuous improvement and sustaining projectsConduct DFM / DFA for the designModify and improve existing designs and productsManage Engineering Change Requests and NoticesComplete the full product lifecycle ( from specification to design , prototype & manufacturing)skills & experience requiredMaster / Degree in Mechanical / Electromechanical EngineeringMin 7 years of experience in R&D product design (consumer electronics / medical instrument / industrial products or machining) Design Knowledge & experience in metal parts, related assemblies, metal die-casting ,high precision machiningComplete full new product development from concept stage to prototype to transfer & product launching Six-Sigma Green / Black Belt Certification will be plusWell versed with GD&T & tolerance stack analysisAble to read and interpret engineering drawingsCompetent in 3D/2D modelling software, particularly with NX (Unigraphics)Willing to work in west area of Singapore (Sembawang / Marsiling / Woodlands)If you are interested in the position , kindly send your CVs to yitwei.kwan(@)randstad.com.sgPlease include your availability, expected salary and reason for leaving current jobWe regret that only shortlisted candidates will be contactedEA: 94C3609 / Reg: R1325913

Thank you for subscribing to your personalised job alerts.

It looks like you want to switch your language. This will reset your filters on your current job search.